background image

 

http://www.tyan.com

 

 

 

 

 

Thunder K8WE 

/// 

S2895 

      

Version 1.01

 

 

Copyright 

Copyright ©   TYAN Computer Corporation, 2004-2005. All rights reserved. No 
part of this manual may be reproduced or translated without prior written 
consent from TYAN Computer Corp. 
 

Trademark 

All registered and unregistered trademarks and company names contained in 
this manual are property of their respective owners including, but not limited to 
the following. 
 
TYAN, Taro and Thunder K8WE are trademarks of TYAN Computer 
Corporation. 
AMD, Opteron, and combinations thereof are trademarks of AMD Corporation. 
Microsoft, Windows are trademarks of Microsoft Corporation. 
SuSE,is a trademark of SuSE AG. 
Linux is a trademark of Linus Torvalds 
IBM, PC, AT, and PS/2 are trademarks of IBM Corporation. 
Winbond is a trademark of Winbond Electronics Corporation. 
 

Notice 

Information contained in this document is furnished by TYAN Computer 
Corporation and has been reviewed for accuracy and reliability prior to printing. 
TYAN assumes no liability whatsoever, and disclaims any express or implied 
warranty, relating to sale and/or use of TYAN products including liability or 
warranties relating to fitness for a particular purpose or merchantability. TYAN 
retains the right to make changes to product descriptions and/or specifications 
at any time, without notice. In no event will TYAN be held liable for any direct or 
indirect, incidental or consequential damage, loss of use, loss of data or other 
malady resulting from errors or inaccuracies of information contained in this 
document.

 

 

 
 
 

Содержание S2895





































































Отзывы: