TYAN S2865 Скачать руководство пользователя страница 50

Страница: 50 / 92

http://www.tyan.com

ECC Redirection

This

feature is used to enable ECC scrubber to correct errors detected in

DRAM during normal CPU requests.

Disabled /

Enabled

DRAM background scrubber

DRAM scrubbing corrects and rewrites memory errors so that
later reads are correct. Doing this while memory is not being used improves
performance.

Disabled

/ 40.0ns / 80.0ns / 160ns / 320ns / 640ns / 1.28u / 2.56u / 5.12u

/ 105.12u

L2 cache background scrubber

This feature allows the L2 Data Cache RAM to be corrected while idle.

Disabled

/ 40.0ns / 80.0ns / 160ns / 320ns / 640ns / 1.28u / 2.56u / 5.12u

/ 105.12u

DCache background scrubber

This feature allows the L1 Data Cache RAM to be corrected while idle.

Disabled

/ 40.0ns / 80.0ns / 160ns / 320ns / 640ns / 1.28u / 2.56u / 5.12u

/ 105.12u

CPU Spread Spectrum

This feature is used to configure CPU spread spectrum.

Disabled

/ Spread

SATA Spread Spectrum

This feature is used to configure SATA spread spectrum.

Disabled

/ Down Spread

PCIE Spread Spectrum

This feature is used to configure PCIE spread spectrum.

Disabled

/ Down Spread

SSE/SSE2 Instruction

This feature is used to enable the function of SSE/SSE2 instruction.
Disabled /

Enabled

System BIOS Cacheable

Enabling this option will cause the BIOS code from ROM to be copied on to the
much faster RAM at location F0000h-FFFFFh, thus increasing system
performance. However, if any program writes to this memory area, a system
error may result.

Disabled

/ Enabled

Содержание S2865





























































































Результаты поиска

Содержание S2865

Отзывы:

TYAN S2865, Руководство пользователя, Страница: 50 / 92

Результаты поиска

Содержание S2865

Отзывы: