http://www.tyan.com
16
2.8 Installing Memory
Please keep in mind that although some memory modules may appear to be high-quality, they may con-
tain inferior or substandard parts. The type of memory you choose to install should be checked against
the memory compatibility list, which is available from Tyan’s website at
http://www.tyan.com
Memory Installation Procedure
Here are some details of memory installation for this board:
At least one unbuffered DIMM must be installed for the system to POST.
The motherboard supports 64MB, 128MB, 256MB, and 512MB PC100/133 SDRAM.
All installed memory will be automatically detected, so there is no need to set any jumpers.
The motherboard supports up to 1.5 (3 DIMMs)* or 2 GB (4 DIMMs)* of memory.
Insert the DIMM by pushing the module into the socket
with even force
. Do not insert one
end and then the other: install the whole module at once or you might bend the DIMM pins.
Make sure the DIMM is securely seated.
Line your module up so that the pins fit into the socket. There is only one way your DIMM can
fit properly. Make sure that the short row of pins is lined up with the short gap in the DIMM
socket.
Lock the DIMM into place by pushing the clips back on either end of the socket onto the
notches in the ends of the DIMM (see pictures below for details).
2
1
Step
1
Step
2
3
Step
* 2.0GB total memory @ 4 DIMMs only, when using 100MHz SDRAM
1.5GB total memory @ 3 DIMMs only, when using 133MHz SDRAM
Check the Tyan website for details on memory compatibility:
http://www.tyan.com
