S1856 Tomahawk BX/A+
29
ONBOARD
on the next page shows the USB ports on the left and PS/2 ports on the right
(respectively).
Connecting Com and Printer Ports
Warning: When plugging in your keyboard and mouse, or when plugging
anything into a serial or Com port, make sure that the power is off. Connecting
these devices and ports while the power is on is called “hot plugging,” and
may damage your system.
Figure 2-17 at the top of the next page shows the ATX double row connectors
on this board. The Com and Printer ports, as well as the other ports, are
labeled.
Note: Only TYAN cables will work on this motherboard. If you are using an
existing case with old cables, your system will not function properly. Use only
TYAN-approved cables.
You are done!
Other than checking the jumper settings and cable connections and putting
the case back on, you are done. Installing a new motherboard may sound
Figure 2-15 Figure 2-16
