TYAN S1470, Руководство пользователя

Страница: 14 / 42

14 S1470-001-01 http://www.tyan.com
3.10 DRAM Installation
The S1470 uses a 64-bit data path from memory to CPU and can
accommodate up to 128 MB of RAM. The mainboard supports Fast
Page Mode, and EDO (Extended Data Out) 72 pin SIMMs.
SDRAM(Synchronous) are also supported in the DIMM slots. DIMM's
must be of the unbuffered variety. All installed memory will be automati-
cally detected so there is no need to set jumpers.
w
SIMM modules must be installed in pairs.
w
Each pair of SIMMs must be of the same size and type.
w
The mainboard supports 1, 2, 4 and 8MBx32 SIMMs.
w
SIMM bank 0 and 1 can use either double or single sided SIMMs.
w
Two SIMMs or One unbuffered DIMM must be installed for the system
to POST.
w
SDRAM DIMMs can be installed one at a time.
w
The mainboard supports 1, 2 and 4Mx 64 DIMM modules.
w
SIMM bank 0 and DIMM bank 0 cannot be used at the same time.
SIMM bank 1 and DIMM bank 1 cannot be used at the same time.
You can use SIMM bank 0 with DIMM bank 1.
You can use SIMM bank 1 with DIMM bank 0.
w
The following table shows some of the available memory configurations.
DRAM Bank
0
DRAM
Bank 1
SDRAM Bank
0
SDRAM Bank
1
Total
4MB x2 none none none 8MB
none none 8MB x1 none 8MB
none none 16MB x1 none 16MB
8MB x2 none none none 16MB
4MB x2 4MB x2 none none 16MB
8MB x2 8MB x2 none none 32MB
16MB x2 none none none 32MB
none none 16MB x1 16MB x 1 32MB
32MB x2 none none none 64MB
16MB x2 16MB x2 none none 64MB
16MB x2 none none 32MB x1 64MB
none none 32MB x1 32MB x1 64MB
32MB x2 16MB x2 none none 96MB
32MB x2 none none 32MB x1 96MB
32MB x2 32MB x2 none none 128MB