http://www.TYAN.com
22
2.16 –HT SLOT brief introduction
The two HT Slots are actually two PCI-Ex16 slots with TYAN private signal definition
and use Hyper Transport to connect two HT cards to the S4881 (CPU Board specially
designed by TYAN).
NOTE
YOU MUST ALWAYS
unplug the power connector from the
motherboard before performing system hardware changes. Otherwise
you may damage the board and/or expansion device.
2.17– Installing the Power Supply
There are three power connectors on your QUAD CPU Cards. Tyan recommends that
you have an EPS12V power supply that has one 24-pin and two 8-pin power
connectors.
PWR3: 2x2 pin ATX 12V power
Connector
PWR2: 8-pin EPS 12V power connector
PWR1: 8-pin EPS 12V power connecto
r
PWR4: 1x4 pin 5V&12V power connector
PWR0: 24-pin EPS 12V power connector
The QUAD CPU Cardsis standard EPS 12V compatible, please take following
combination for reference. Please be aware that ATX 2.x, ATX12V and ATXGES
power supplies are
not compatible
with the board and can damage the motherboard
and/or CPU(s).
