background image

http://www.tyan.com

 

SAFETY INFORMATION

 

 

Before installing and using TYAN GT24-B5501, take note of the following 
precautions: 

 

·

Read all instructions carefully. 

·

Do not place the unit on an unstable surface, cart, or stand. 

·

Do not block the slots and opening on the unit, which are provided for 
ventilation. 

·

Only use the power source indicated on the marking label. If you are not 
sure, contact the power company. 

·

The unit uses a three-wire ground cable, which is equipped with a third 
pin to ground the unit and prevent electric shock. Do not defeat the 
purpose of this pin. If you outlet does not support this kind of plug, 
contact

 

your electrician to replace your obsolete outlet. 

·

Do not place anything on the power cord. Place the power cord where it 
will not be in the way of foot traffic. 

·

Follow all warnings and cautions in this manual and on the unit case. 

·

Do not push objects in the ventilation slots as they may touch high 
voltage components and result in shock and damage to the 
components. 

·

When replacing parts, ensure that you use parts specified by the 

manufacturer. 

·

When service or repairs have been done, perform routine safety checks
to verify that the system is operating correctly. 

·

Avoid using the system near water, in direct sunlight, or near a heating 
device. 

·

Cover the unit when not in use. 

Содержание GT24 B5501







































































Отзывы: