TYAN FT83-B7119, Руководство сервисного инженера

Страница: 94 / 221

http://www.tyan.com
94
4.7 Installing the Memory
Before installing memory, ensure that the memory you have is compatible with the
motherboard and processor. Check the TYAN Web site at
http://www.tyan.com for
details of the type of memory recommended for your motherboard.

This platform supports (12)+(12) DDR4 RDIMM/RDIMM 3DS/LRDIMM/
LRDIMM 3DS 2933/2666

Up to 768GB RDIMM/ 1,536GB LRDIMM/ 3,072GB RDIMM 3DS/LRDIMM 3DS
are supported

1.2V DDR4 DIMMs are supported

All installed memory will be automatically detected. No jumpers or settings
need to be changed for memory detection.

All memory must be of the same type and density. Different memory types
can NOT be mixed and matched on the same motherboard.

2933 MHz memory is supported by 2
nd
Generation Intel Xeon Scalable
Processor Platinum 8200 and Gold 6200 series processors only.

16Gb-based memory modules are supported by 2
nd
Gen Intel Xeon
Scalable-SP processors only.
 Intel® Optane™ DC Persistent Memory Module (DCPMM) Implementation
Requirements

DCPMM memory is supported by 2
nd
Generation Intel Xeon Scalable
Processor Platinum 8200, Gold 6200, Gold 5200 series and Silver 4215
processors only.

All installed DCPMMs must be in the same size. Mixing DCPMMs of
different capacities is not supported.

To maximize performance, balance all memory channels.

No DDR4 1Rx8 for either DCPMM Memory Mode or App-Direct Mode

Maximum 6 DCPMMs per processor (install 1 in each memory channel).

Minimum 2 DCPMMs per processor (1 per memory controller).
Key Parameters for DIMM Configuration
Parameter Possible Values
# of Channels 1, 2, 3, 4, 5 or 6
# of DIMMs Populated per channel 1DPC or 2DPC
DIMM Type RDIMM (w/ECC), 3DS-RDIMM, LRDIMM, 3DS-LRDIMM, DCPMM
DIMM construction

non-3DS RDIMM Raw Cards: A/B (2Rx4), C (1Rx4),
D (1Rx8), E (2Rx8)

3DS RDIMM Raw Cards: A/B (4R/4)

non-3DS LRDIMM Raw Cards: D/E (4Rx4)

3DS LRDIMM Raw Cards: A/B (8Rx4)

DPCMM