TYAN B8251T83E8HR-2T-N, Руководство сервисного инженера

Страница: 102 / 234

http://www.tyan.com
102
5.6 Thermal Interface Material
There are two types of
thermal interface materials
designed for use with the
processors.
The most common material
comes as a small pad
attached to the heat sink at
the time of purchase. There
should be a protective cover
over the material. Take care
not to touch this material.
Simply remove the protective
cover and place the heat sink
on the processor.
The second type of interface
material is usually packaged
separately. It is commonly
referred to as ‘thermal
compound’. Simply apply a
thin layer on to the CPU lid
(applying too much will
actually reduce the cooling).
NOTE: The new heatsink packed in the TN83-B8251 content box comes with
pre-applied thermal grease. Once the heatsink has been removed from the
processor, you need to clean the processor and heatsink using an alcohol solvent.
Then apply new thermal grease before reinstalling the heatsink.
NOTE: Always check with the manufacturer of the heat sink & processor to
ensure that the thermal interface material is compatible with the processor and
meets the manufacturer’s warranty requirements.