TX RX Systems 28-13-01F Скачать руководство пользователя страница 3

WARRANTY

This warranty applies for one year from shipping date.

TX RX SYSTEMS INC. warrants its products to be free from defects in material and workmanship
at the time of shipment. Our obligation under warranty is limited to replacement or repair at our op-
tion, of any such products (with the exception of tubes) which shall have been defective at the time of
manufacture. TX RX SYSTEMS INC. reserves the right to replace with merchandise of equal per-
formance although not identical in every way to that originally sold. TX RX SYSTEMS INC. is not
liable for damage caused by lightning or other natural disasters. No product will be accepted for re-
pair or replacement without our prior written approval.

All Shipping charges on returned products must be prepaid by the purchaser. TX RX SYSTEMS
INC. shall in no event be liable for consequential damages, installation costs or expenses of any na-
ture resulting from the purchase or use of products, whether or not they are used in accordance with
instructions. This warranty is in lieu of all other warranties, either expressed or implied, including
any implied warranty of merchantability or of fitness. No representative is authorized to assume for
TX RX SYSTEMS INC. any other liability or warranty than set forth above in connection with our
products or services.

Содержание 28-13-01F
















Отзывы: