twotrees TT402DK, Руководство по эксплуатации продукта

Страница: 6 / 12

Hammock Spring
Hammock Hook
Strong & Secure
6
HOW TO HANG
YOUR HAMMOCK
We recommend using the Two
Trees screw eye and hook
(TT502HH) with the Two Trees
springs (TT503HS) The spring
is optional.
NOTE: It is recommended
to use structurally sound,
strong timber posts that are
10cm square or more. When
installing always check with a
qualified builder for safety.
For sturdy masonry walls (not air/hollow/single brick or besser block) a 10mm dyna bolt with a
large washer and rope can be used.
For detailed installation instructions on (TT503HS) Two Trees Spring, please refer to the
Two Trees website.
www.twotreeshammocks.com.au or scan the below QR code.
Read instructions before use and keep for future reference. Failure
to read these instructions before use can lead to an increased risk
of injury. When installing always check with a qualified builder for
safety.
WARNING :
DO NOT EXCEED THE MAXIMUM LOAD OF 200KGS
PERMANENT INSTALLATIONS
TEMPORARY INSTALLATIONS
For Temporary instillations that are portable and do not require a fixed point we recommend
using the Two Trees stand that was included in your double hammock kit (TT402DK).
Assemble and set up your double
hammock kit stand according to
the included instructions that were
included in your kit.
Attach the hammock onto the hooks at
either end ensuring the hammock and
suspension cords are not twisted.
1
2