7
4.2 Notice for Installment:
1.
The supply voltage should be in accordance with the working voltage of the
device.
2.
The device is equipped with grounding bolt at the back. It shall be reliably
connected to ground wire that comply with the safety regulations with copper wire
no less than 1.5mm².
3.
After installation, check the tightness of all the connection, the correct functioning
of the voltage and the reliability of the ground wire.
4.
Set the device on a flat, secure surface, and make the sides away from
non-combustible material (eg. Brick walls or windows) no less than 10 cm, and
the rear at least 20 cm.
5.
When supplying power, the appliance must be connected to an all-pole
disconnect switch (leakage switch), with at least 3mm contact opening distance of
each pole of the switch. Do not pile sundries in front of the switches for
convenient operation.
6.
Do not set any combustible or explosive objects close to the appliance. The
working ambience temperature shall be lower than 45
℃
and the relative humidity
shall be less than 85%.
7.
All the installation of this device should be done by professional and qualified
personnel.
4.3 Special notes
1.
The appliance is a commercial machine which is not applicable for home use and
should be operated by professional personnel.
2.
No shaking or tilting during using.
3.
Do not dismantle or modify the device due to the possibility of serious accidents
when dismantling or modifying.
4.
Do not open the appliance enclosure. The appliance contains high pressure
electric circuit, electric shock may occur when dismantling the frame.
5.
Unscrew the plug and cut off the power when cleaning.
6.
Do not spray water directly to the product when cleaning. Water can conduct
electricity, thus electric leakage may cause electric shock.
7.
Do not pat the product and put heavy object onto the product.
8.
Abnormal operation may cause damage and danger.
9.
Do not touch the appliance directly with hand due to high temperature during or
after the operation. High temperature may cause scald.
10.
When the thunderstorm is coming, cut off the power supply asap to avoid damage
done by the lighting stroke.
11.
Do not destroy the control panel with hard or sharp objects.
12.
After working, cut off the power supply.
13.
All the maintenance work should be done by qualified personnel, otherwise it
would be dangerous for any other people to conduct maintenance.
TWOTHOUSAND.COM