Bottom View
Bottom View
P.3
Aileron Servo Lead
Scatter-Gun(A)
Ø8x36mm
Scatter-Gun(B)
Ø8x31mm
Pre-glued
M2
Nut
PM2x6mm
Screw
8
8
16
d2xD5mm
Washer
Completed
Please dry fit wing joiner into left and right wing to make sure they fit with the
proper dihedral angle, mark the wing joiner if necessary. Apply epoxy glue to
both sides of all surfaces in contact. Use a stick to apply the glue to inner side
of wing joiner sleeve, and apply the glue to wing joiner before putting them
together. Wing joiner not glued properly will lead to wing failure and plane crash.
PM2x6mm
M2 Nut
M2 Nut
d2xD5mm
Washer
d2xD5mm
Washer
d2xD5mm
Washer
Main Wing
1
Main Wing
3
Retractable Landing Gear
2
A317PO24531116
