Twisty Ride SCOOTER IPHONE CASE, Руководство пользователя

Страница: 18 / 37

www.twistyride.com 18
ASSEMBLING THE RAM ® BRACKET
The scooter bracket comes in three parts which need to be
assembled as pictured below. To do so, unscrew the locking
bolt until both ball heads can be fitted into the bracket. Once
fitted, screw the locking bolt again. This bolt will also allow
you to adjust the position of the mount on the scooter and
lock it into position.
The scooter kit is made to be mounted on the mirror stem.
The mirror needs to be undone at the base of its stem using
the appropriate spanner. The mirror / pinchbolt mount will
then usually be fitted on the threaded portion of the stem
and re-assembled with it. Some mirror stems are not
threaded and are fixed using a conical pressure bolt. If this
is the case, alternative RAM® solutions must be
investigated.