1
http://www.modelengines.com.au
TWISTER
introDuction
About the Twister Storm 3DX
The Twister Storm 3DX is designed to fly aerobatic
and 3D manoeuvres using the latest generation
brushless motors and lithium polymer battery packs
and without the need for upgrades.
The Twister Storm 3DX’s state of the art 120 degree
CCPM control system ensures precise control. This
control system combined with precision wooden
main rotor blades gives the Twister Storm 3DX its
precise flight characteristics.
The high performance and efficient Cyclone 440
Turbo brushless motor, powers the Twister Storm
3DX through aerobatics with ease. The use of high
quality ball races throughout the helicopter and
the belt driven tail drive system, not only ensures
smooth operation, but by reducing friction, flight
times increase as a result of the lower current draw.
Factory Assembled
The Twister Storm 3DX comes assembled with four
EnErg S7.5 servos installed along with a Twister
2.4GHz 6 channel computer radio* with 8 model
memory. A high performance brushless motor,
Twister 25A speed controller and a Twister HL400
tail lock gyro are also fully installed at the factory.
craSheS & Spare partS
The Twister Storm 3DX has been designed to be
strong and easy to repair, however, should the
helicopter crash, there is a chance that parts will
be damaged. In the event of a crash, it is important
that the helicopter be thoroughly checked before
undertaking further flights to ensure that no danger
could be posed to yourself, bystanders or property.
If the structural integrity of any part is in doubt,
the part should be replaced. Crash damage is NOT
covered by warranty.
Use the exploded view at the rear of this manual,
along with the listed part numbers, and contact your
hobby supplier for the required parts.
neVer flown? pleaSe reaD...
The Twister Storm 3DX is for accomplished R/C
helicopter pilots. If you are new to R/C helicopter
flying, we would recommend starting with one of
the easier to fly members of the Twister family of
helicopters before progressing to the Twister 3D
Storm.
Safety Information
Radio Control Models are not toys and serious injury
to persons or damage to property can result if not
used in a responsible manner.
In flight the main rotor blades can approach
2000rpm, therefore never fly closer than 5 metres
and never fly your model at head height.
In the UK, please observe the principles of safety
as outlined by the governing body for model flying,
the British Model Flying Association (BMFA). www.
bmfa.org
In Australia, please observe the guidelines for the
safe operation of radio control models as outlined
by the Model Aircraft Association of Australia
(MAAA). www.maaa.asn.au
J Perkins Distribution Ltd declares that this remote controlled
model helicopter is in compliance with the essential requirements
and other relevant provisions of Directive 1999/5/EC.
A copy of the declaration of conformity can be obtained from
J Perkins Distribution Ltd, Ashford rd, Lenham, Kent. ME17 2DL
0678
*Twister Storm 3DX is available in two versions.
This item is not included in the 'Radio Ready' version.
