Twister Skylift 2.4, Руководство по сборке и подготовке к полету

Страница: 16 / 36

16
http://www.jperkinsdistribution.co.uk
R/C
Twister skyLift
RANGE & POWER CHECK
It is important to check the transmitter will operate the model satisfactorily at maximum range.

In order to do this place your model on the ground and walk away from the model whilst operating
the swashplate controls.
Check that the servos in the helicopter operate without interference up to a distance of 50 metres.

Check the transmitter Battery Status LCD shows that the transmitter batteries have a voltage above
4.4V.
Do not fly if battery voltage is below 4.4V.
Your Twister SkyLift is ready for flight, but...
WARNING!
...If you are not an experienced R/C model helicopter pilot you should read the ENTIRE manual before
flying.
WARNING!
Do not fly at 50 metres distance or greater. At distances of greater than 50 metres, it will become virtually
impossible to see your Twister SkyLift well enough to control it accurately.
We strongly recommend you fly no further away than 15 metres.
WARNING!
After finishing flying, always disconnect the battery from the helicopter FIRST. Then switch off the
transmitter. Do not switch off the transmitter first and disconnect battery second.
WARNING!
You must take care and ensure the flying area is large enough and contains no obstacles (such as
children, animals or furniture), which could be hit while you are flying your Twister SkyLift.
fliGht controls mode 2
FLIGHT CONTROLS LAYOUT
Rotate
nose right
Rotate
nose left
Climb
Descend
Crab
right Crab
left
Forwards
Backwards

Each dual axis stick unit of your transmitter controls 2 helicopter functions (complete with trimmers
on each function) giving you control about all 4 axes of flight). See above.