Twister GT200IIR, Руководство пользователя - Каталог запасных частей

Страница: 22 / 66

19
SERVICE INSTRUCTIONS
Figure 7
ENGINE OIL PLUG, COVER
0.6-0.7mm
SEAM,DIRT,CARBON VERIFY
WASHER VERIFY
SEAM VERIFY
Figure 8
B. Engine Lubrication
You must change the oil in the crankcase a�er the first 5 hours of operating of your new
engine (See Fig. 7) and a�er 10 hours of use therea�er. That will insure proper lubrication of
internal parts and prevent costly repairs due to excessive wear.
a . Remove drain plug located on the right rear side of
engine. Tip kart backwards slightly by blocking up the
front end and drain oil into suitable container.
b. Remove and clean Oil Screen.
c . Replace drain plug and tighten securely. Place
kart in a level position.
d . Refill crankcase (approximately 1 1/4 pint) to top
of filler neck with SAE 10W40 oil. Use same grade of
oil as used originally.
e . Check oil level before each use of kart or a�er
each 10 hours of operation. Add oil to bring up to
proper level. Do not mix various grades of oil.
C. Spark Plug
a . Remove the spark plug and inspect it each time you
change the oil. (Use a spark plug wrench) The electrodes
should be kept clean and free of carbon. The presence of
carbon or excess oil will greatly reduce proper engine
performance. If possible, check the spark plug gap
(area between electrodes) using a wire feeler gauge.
This specification is 0.6~0.7mm.
b . Before installing spark plug coat threads lightly
with graphite grease if possible, to ensure easy removal
next time the spark plug needs inspection.
c . It is advisable to replace the spark plug at least once
a year to insure easy starting and good engine performance.
D. Carburetor Adjustment
Never make unnecessary adjustments. The factory recommended se�ings are correct for most
applications.
Used Oil Must Be disposed of at a proper collection Center
WARNING