Figure 10
TEMPERATURE
HEAT
FLAME
MASTER POWER
LO
HI
OFF
ON
OFF
ON/OFF
INDICATOR LIGHT
OPERATING INSTRUCTIONS • CONTROL FUNCTIONS
TO ACCESS CONTROL PANEL
- Open louvered
door along top of insert by pulling down on center
mounted handle.
MASTER POWER
- The Master Power switch sup-
plies power to all of the functions of the fireplace. This
switch must be in the on position for any functions
including the remote to work.
HEATER
- The Heater switch turns the heater element
and blower motor on and off. To adjust temperature
setting use the temperature control knob.
TEMPERATURE
- The Temperature control knob
regulates the temperature level of the heater. Turning
the knob clockwise will increase the heat output. The
further the knob is rotated clockwise, the higher the
set point temperature. Turning the knob counter-
clock-wise will lower the set point temperature.
Figure 11
TEMPERATURE
HEAT
DOWN LIGHT
FLAME
MASTER POWER
INDICATOR LIGHT
LO
HI
OFF
ON
ON/OFF
ON/OFF
OFF
Figure 9
TEMPERATURE
HEAT
MASTER POWER
FLAME
LO
HI
OFF
HI
OFF
ON
OFF
ON
E-7
DOWN LIGHT (28EFE003GRA & 33EF003GRA
ONLY)
-The Down Light switch turns on the down
lights that illuminate inside of the firebox.
FLAME (18EF003GAA)
The Flame control knob adjusts the flame brightness.
Turning the knob to the left (counter-clockwise) dims
the lights and flame effect. If the knob is turned
completely to the left (counter-clock-wise) it will turn
the flame effect OFF. Turning the knob to the right
brightens the lights and flame effect.
FLAME (23EF003GRA, 28EF003GRA &33EF003GRA)
Each time the flame button is pressed, the intensity
of the flame increases. There are five brightness levels
you can cycle through including the OFF setting.
WARNING: During any service of this appliance,
the power to the unit must be turned off. First turn
the main power switch to the “OFF” position. Then
remove the electrical plug from the wall outlet.
Model #
28EF003GRA
33EF003GRA
Model #
23EF003GRA
Model #
18EF003GAA