Wireless Router
TwinMOS
Page 27
TROUBLESHOOTING
Symptom :
Power LED off
Resolution:
Connect the power adapter to your AP Router and plug it into the power outlet.
Note:
Only use the power adapter provided with your AP Router. Using any other adapter may
damage your AP Router.
Symptom :
Can not setting AP through web browser
Resolution:
The Ethernet cable(RJ45) must plug to LAN port of AP Router.
Check that the IP address in the URL field is correct.
Check your host PC IP address. If the IP address of AP Router is 192.168.1.254 then your IP of host
PC must set 192.168.1.1~253.
Symptom :
Forgot IP address
Resolution:
If you forgot the IP address of AP Router you can press reset button to restore the default factory settings
by pressing this button for five seconds. The default IP is 192.168.1.254.
Symptom :
Can not setting AP Router from a wireless card
Resolution:
Make sure that the Mode, SSID, Channel and encryption settings are set the same on each wireless
adapter.
Make sure that your computer is within range and free from any strong electrical devices that may
cause interference.
Check your IP Address to make sure that it is compatible with the Wireless Router.
Symptom :
Can not connect to ISP
Resolution:
Make sure that your DSL or Cable modem is running correctly and connected to the WAN port of the
Broadband Router.
Make sure that the right connection type is used in the web configuration.
Make sure that the username and password used in the connection type is correct.
Some ISP's do not care if you share your broadband connection among multiple users.
Other ISP's will explicitly restrict this type of activity in your service contract. It is important that you
