Booming B Series Wireless AP
TwinMOS
Page 24
TROUBLESHOOTING
Symptom:
Power LED off
Resolution:
Connect the power adapter to your AP and plug it into the power outlet.
Note:
Only use the power adapter provided with your AP. Using any other adapter may damage your
AP.
Symptom:
Can not setting AP through web browser
Resolution:
l
The Ethernet cable (RJ45) must plug to LAN port of AP.
l
Check that the IP address in the URL field is correct.
l
Check your host PC IP address. If the IP address of AP is 192.168.1.254 then your IP of host PC
must set 192.168.1.1~253.
Symptom:
Forgot IP address
Resolution:
If you forgot the IP address of AP you can press reset button to restore the default factory settings by
pressing this button for five seconds. The default IP is 192.168.1.254.
Symptom:
Can not setting AP from a wireless card
Resolution:
l
Make sure that the Mode
、
SSID
、
Channel and encryption settings are set the same on each wireless
adapter.
l
Make sure that your computer is within range and free from any strong electrical devices that may
cause interference.
l
Check your IP Address to make sure that it is compatible with the Wireless AP.
