G
MANTEL/TOP
COMPLETED
ASSEMBLY
L
M
L
M
N
N
N
10. Locate Mantel/Top (G) and lay finished
side up on top of the completed assem-
bly. Make sure that top seats onto Wood
Dowels (N). From the inside attach the
Mantel using Bolts (L) and Washers
(M), through the pre-drilled holes in
the mounting blocks.
HAND TIGHTEN ONLY.
11. Using Philips head screwdriver tighten
all bolts alternating top and bottom, left
and right. Please read all Electric
Fireplace Insert Instructions prior to
installing Electric Insert in your com-
pleted Fireplace Mantel. Install the
insert in your fireplace close to its final
position. Move your completed unit
only short distances. Move completed
unit with great care. It takes two people
to move completed unit into its posi-
tion.
12. Remove the two mounting brackets
attached to the back of the Left Front
Panel (B) and Right Front Panel (C). Set
aside with the wood screws.
13. Lift insert carefully into the back if the
unit and center in the insert opening.
Do not drag insert across Base/Hearth
as it may scratch your unit.
14. Install the mounting brackets to hold
insert flush against the inside of the
mantel.
COMPLETED
MANTEL
INSTALL
INSERT
FROM BACK
ELECTRIC
FIREPLACE INSERT
E-4
COMPLETED
UNIT
Twin-Star International, Inc.
Delray Beach, FL 33483
In USA: 866-661-1218
In Canada: 866-374-9203
Model# 33WM684
Made in China
Printed in China
revised 04/05
© 2004, Twin-Star International, Inc.
