4
ASSEMBLY INSTRUCTIONS
PREPARATION
Before beginning assembly of product, make sure all parts are present. Compare parts with
package contents list and diagram above. If any part is missing or damaged, do not attempt to
assemble, install or operate the product. Contact customer service for replacement parts.
Estimated Assembly Time: 60 Minutes
Tools Required for Assembly (not included): Phillips head screwdriver, scissors and utility knife
Fig. 1
Fig. 2
C
F
E
B
Hardware Used
Hardware Used
BB
BB
AA
AA
CC
CC
Bolt
Bolt
x 2
x 8
Washer
Washer
x 2
x 8
Wood Dowel
Wood Dowel
x 4
x 4
AA
BB
A
CC
CC
CC
BB
AA
1. Locate Hearth/Base (A) and set out fi nished side
up on the fl oor.
Locate Left Front Panel (B) and Right Front Panel
(C), insert one Wood Dowel (CC) into each of the
pre-drilled holes. Attach to Hearth/Base (A) using
Bolts (AA) and Washers (BB) through the
pre-drilled holes in the mounting blocks.
HAND TIGHTEN ONLY.
2. Locate Left Side Panel (E) and Right Side Panel (F),
insert one Wood Dowel (CC) into each of the
pre-drilled holes. Attach to the completed front panel
assembly and Hearth/Base use Bolts (AA) and
Washers (BB) through the pre-drilled holes in the
mounting blocks.
HAND TIGHTEN ONLY.