7
Fig. 2
Fig. 3
Fig. 4
3. Locate Hearth/Base (A) and set out finished side up
on the floor.
Insert one Wood Dowel (CC) into each of the
pre- drilled holes.
Attach the completed Front panel assembly from
step 2 to the Hearth/Base (A). Make sure the dowels
are seated into the pre-drilled holes in the
Hearth/Base. Using Bolts (AA) and Washers (BB)
attach panels through pre-drilled holes in the
mounting
blocks.
HAND TIGHTEN ONLY.
AA
CC
AA
BB
A
5. Insert one Wood Dowel (CC) into each of the
pre-drilled holes on the top edges of the Assembly
from step 4. Then locate Mantel/Top (G) and lay
fi nished side up on top of completed assembly.
From the inside, attach Mantel/Top (G) using Bolts
(AA) and Washers (BB) through the pre-drilled holes
in the mounting blocks.
HAND
TIGHTEN
ONLY.
Using Phillips head screwdriver tighten all Bolts
alternating top and bottom, left and right.
Hardware Used
Hardware Used
Hardware Used
BB
BB
BB
AA
AA
AA
CC
CC
CC
Bolt
1/4 in. x 1-1/4 in.
Bolt
1/4 in. x 1-1/4 in.
Bolt
1/4 in. x 1-1/4 in.
x 6
x 10
x 2
Washer
1/4 in. x 3/4 in.
Washer
1/4 in. x 3/4 in.
Washer
1/4 in. x 3/4 in.
x 6
x 10
x 2
Wood Dowel
Wood Dowel
Wood Dowel
x 4
x 4
x 4
BB
G
AA
CC
CC
BB
BB
E
F
AA
AA
CC
CC
4. Locate Left Side Panel (E) and Right Side Panel (F),
insert one Wood Dowel (CC) into each of the
pre-drilled holes. Attach to the completed front panel
assembly and Hearth/Base use Bolts (AA) and
Washers (BB) through the pre-drilled holes in the
mounting blocks.
HAND TIGHTEN ONLY.
