5
Hardware Used
CC
Wood Dowel
x 4
Fig. 4
Fig. 3
Fig. 5
Hardware Used
AA
CC
Bolt x
4
Wood Dowel
x 4
3. Insert one Wood Dowel (CC) into each of the
pre-drilled holes in the center shelf (D). Put the
Upper Side Panels (I) snug to the Center Shelf (D).
Make sure the wood dowels are seated in the
pre-drilled
holes.
CC
I
I
AA
CC
EE
G
K
J
J
EE
Screw
x 28
Hardware Used
5. Attach Side Back Panels (J) and Center Back Panel
(K) to the back of the completed assembly from step
4. Use a Phillips Head Screw Driver, tighten Wood
Screws (EE) through the pre-drilled holes in the Side
Back Panels (J).
4. Insert one Wood Dowel (CC) into each of the
pre-drilled holes on the top of Upper Side Panels (I).
Then locate Mantel/Top (G) and lay fi nished side up
on top of completed assembly. From the inside,
attach Mantel/Top (G) using Bolts (AA) through the
pre-drilled holes in the mounting blocks.
HAND
TIGHTEN
ONLY.
