6
Fig. 6
Fig. 7
7. Connect the Right Back Panel (M), Left Back Panel
(N) and completed assembly with Connection Plate,
tighten Screws (EE) through the pre-drilled holes.
8. Push the Center Back Panel (O) to the groove on
the Upper Back Panel slowly as diagram show.
Hardware Used
Hardware Used
EE
CC
Screw x
12
Wood Dowel
x 4
O
EE
M
N
CC
6. Insert one Wood Dowel (CC) into each of the
pre-drilled holes on the completed assembly. Attach
the Left Back Panels (M) and Right Back Panel (N)
to the completed assembly. Make sure that dowels
are seated into the pre-drilled holes .
Fig. 8