7
Fig. 9
H
H
D
D
Fig. 8
KK
JJ
J
I
Hardware Used
Hardware Used
KK
JJ
x 2
x 12
Knob (with bolt)
Shelf Pin
8. Locate Right Front Door (J) and Left Front Door (I).
Slide door hinge keyhole into panel hinge bracket.
(Diagram
1)
Use Phillips Head Screwdriver to tighten screws.
(Diagram 2)
TO ADJUST HINGES
To adjust door forward or backward change keyhole
slot position. (As Shown In Diagram 3a)
To adjust door right or left loosen/tighten screw.
(As Shown In Diagram 3b)
To adjust door up or down adjust bracket height.
(As Shown In Diagram 3c)
Attach the Knob (KK) to the Left Front Door (I) and
Right Front Door (J), use the bolts attached through
the pre-drilled holes in the doors. Then use a Phillips
Head Screwdriver to tighten the bolts.
9. Choose desired height of Shelves (D, H) and place
the four Shelf Pin (JJ) into same height shelf holes
inside side panels. Insert Wood Shelves (D, H), allow
Wood Shelves (D, H) to rest on the Shelf Pin (JJ).
06/27/11
