Twin Disc MG-5170DC, Руководство по обслуживанию

Страница: 112 / 250

112
Twin Disc, Incorporated
Cleaning and Inspection
Marine Transmission Service Manual #1020667
Valve Seats
Inspect valve seats for burrs, nicks and scratches. If you cannot remove
these defects with a crocus cloth, replace the part. Check to see that the
valve is seating properly after reworking the valve seat.
Bearings
q
Inspect bearings for roughness of rotation. Replace the bearing if the
rotation is rough.
q
Inspect bearings for corrosion, and for indication of wear of balls or
rollers. Inspect for scored, scratched, cracked, pitted or chipped races.
If you find one of these defects, replace the bearing.
q
Inspect bearing bores and shafts for grooved, burred, or galled
conditions that would indicate the bearing has been turning in its
housing or on its shaft. If you cannot repair the damage with a crocus
cloth, replace the part.
Bushings and Sleeves
Inspect bushings for size and out-of-roundness. Inspect for scores, burrs,
sharp edges, and evidence of overheating. Remove scores with a crocus
cloth. If the bushing is out-of-round, deeply scored, or excessively worn,
replace it.
Thrust Washers and Spacers
Inspect thrust washers for distortion, scores, burrs and wear. Rework or
replace any defective thrust washers or spacers.