Twin Disc AM080, Руководство оператора

Страница: 7 / 22

1
©2019 Twin Disc, Incorporated
Introduction
Pump Drive Operator’s Manual #1033752
Introduction
General Information
This publication provides the information necessary for the operation and
routine maintenance of the Twin Disc, Incorporated equipment specified
on the cover of this manual. Specific engineering details and performance
characteristics can be obtained from the Product Service Department of
Twin Disc, Incorporated, Racine, Wisconsin, USA.
Operating personnel responsible for this equipment should have this
manual at their disposal and be familiar with its contents. Applying the in-
formation in the manual will result in consistent performance from the unit
and help reduce downtime.
Replacement Parts
Parts Lists
See the engineering assembly drawings in Engineering Drawings section
of the Service Manual to facilitate ordering spare or replacement parts.
Ordering Parts
All replacement parts or products (including hoses and fittings) must be of
Twin Disc origin or equal, and otherwise identical with components of the
original equipment. Use of any other parts or products will void the war-
ranty and may result in malfunction or accident, causing injury to person-
nel and /or serious damage to the equipment.
Renewal parts and service parts kits may be obtained from any authorized
Twin Disc distributor or service dealer.
Do not order parts from the part numbers on the engineering draw-
ings. These numbers may be referenced for part identification; how-
ever, they should be verified on the bill of material (BOM) before an
order is placed. BOM numbers are stamped on the unit nameplate.