Operation Manual
1. Important Information
1.1 Hazard Symbols Used in the Manuals
This manual includes the hazard symbols defined below when the operations or maintenance job
involves a potential danger. These symbols describe the level of danger involved in performing a job on
the tool and the precautions to take to avoid the hazard.
1.2 Safety Requirements
Important
Make sure to read, understand, and strictly follow all safety related instructions before operation or
maintenance of this equipment.
Intended Users
This manual is to be made available to all persons who are required to install, configure or service
equipment described herein, or any other associated operation.
Application Area
The equtiment described is intended for machinery production and assembling spare parts. It is used to
press, size, assemble, and rivet small parts and not for other use.
Personnel
Installation, operation and maintenance of the equipment should be carried out by qualified personnel. A
qualified person is someone who is technically competent and familiar with all safety information and
established safety practices with the installation process, operation and maintenance of this equipment;
and with all the hazards involved.
1.3 Safety Instruction
Before maintenance on pressured parts in the machine, you
MUST
release the pressure in the pressured
system. At the same time,
DO NOT
stand in the direction facing the charger, the operator should on the
opposite side and remember
DO NOT
strike, press or transfer until it is discharged.
NOTE
: Immediately stop operating the equipment if not working properly. Contact a certified technical
support engineer for repair. The equipment must not be operated without approval from the certified
technical support engineer.
