Technical changes for purposes of a technical advancement as well as deviation in colour, errors and printing mistakes are reserved.
12
E.1 Size input
●
For example testing luxurious wheel rim of Santana, please see picture on last
page , use ruler that this machine has to measure gap size between machine and
tyre: A=7.5cm
Press↑, number increases
Press↓, number decreases
●
Use calliper that the machine has to measure ty width, see picture L=6.0 inch
Press↑, number increases
Press↓, number decreases
This size is caliber of tyre which needn’t to be measured, see tyre model “185/70
R13” d=13 inch
Press↑, number increases
Press↓, number decreases
E.2 Some examples about balancing
●
Press Start key, 8 seconds later, automatic brake shows as pictures:
140 is error value inside tyre
110 is error value outside tyre
●
Rotate wheel to make inside indicator lamp be on and vertical over the main shaft,
strike 140g lead lump on wheel steel(may use pedal brake to assist making tyre
steady) as picture
●
At this time inside indicator indicates 00, then rotate wheel to make outside
indicator lamp be on and vertical over the main shaft, take away 110g lead lump
from wheel steel as picture
●
At this time outside indicator also indicates 00, balance is over, unload the tyre.If
you test tyre again, you needn’t switch off power.
Содержание TW F-50 T
Страница 1: ......