Twilight DT4221 Скачать руководство пользователя страница 14 | Manualshive

Страница: 14 / 81

Twilight DT4221 Скачать руководство пользователя страница 14

8

Usage Notes

Usage Notes

Follow these precautions to ensure safe operation and to obtain
the full benefits of the various functions.

DANGER

If the test lead or the instrument is damaged,
there is a risk of electric shock. Before using the
instrument, perform the following inspection.

•

Before using the instrument, check that the
coating of the test leads are neither ripped nor
torn and that no metal parts are exposed. Using
the instrument under such conditions could
result in electrocution. Replace the test leads
with those specified by our company.

•

Before using the instrument the first time, verify
that it operates normally to ensure that no
damage occurred during storage or shipping. If
you find any damage, contact your authorized
Hioki distributor or reseller.

Installation

Installing the instrument in inappropriate locations may cause a
malfunction of instrument or may give rise to an accident. Avoid
the following locations.

CAUTION

• Exposed to direct sunlight or high temperature

• Exposed to corrosive or combustible gases

• Exposed to water, oil, chemicals, or solvents

• Exposed to high humidity or condensation

• Exposed to a strong electromagnetic field or

electrostatic charge

• Exposed to high quantities of dust particles

• Near induction heating systems (such as high-

frequency induction heating systems and IH cooking
equipment)

• Susceptible to vibration

«
...
12
13
14
15
16
...
»

Содержание DT4221


















































































Отзывы:

Нет отзывов