4. PROTOCOLS & MESSAGING
TWIG Beacon transfers its data via ISM band. The relevant data is being
transferred to system backend via MPTP messaging. Please refer to TWIG
MPTP v3.24 or later for details.
5. SAFETY & RECYCLING
Usage: -20°C to +40°C
Storage: -30°C to +70°C
Do not open the device or battery by yourself or pierce holes in it. Rough
handling may break the circuitry inside the device. Do not drop, knock,
twist or shake the device or its battery. Keep the device dry, liquids contain
minerals which could corrode electronic circuits. If the device gets wet,
turn it off and dry the device and the battery immediately. Put the device
into an upright position and let it dry. It is recommended that a dealer or
service personnel check that the device functions properly. Even though
the device is waterproof, do not wet the device unnecessarily or immerse it
in water. Protect the device from heat. High temperatures may shorten the
life of the electronic devices, melt or warp plastics and damage batteries.
Do not warm up the device or battery or use it near fire. Do not short-circuit
the battery or battery contacts. Exposing the metal strips of the battery
to a close contact with a metallic object, such as a coin, a clip or a set of
keys can cause accidental short-circuiting and damage the battery. Use
the battery only for the purpose it is intended. Clean the device with a soft
cloth, dampened slightly with mild soapy water. Do not clean the device
with harsh chemicals, solvents or other corrosive substances. Only allow
service personnel authorised by the dealer to service the device.
CARE AND MAINTENANCE
NOTE: The instructions below apply to the device, its accessories and
integrated batteries.
•Dust and dirt may create static electricity to cover. Do not use or keep the
device in dusty or dirty surroundings.
•Rough handling may break the circuitry inside the device. Do not drop,
knock, twist or shake the device.
•Keep the device dry. Liquids contain minerals which could corrode
electronic circuits. If the device gets wet, turn it off and dry the device.
•Even though the device is waterproof, do not wet the device unnecessarily
or immerse it in water.
•Protect the device from heat. High temperatures may shorten the life of
the electronic devices, melt or warp plastics and damage batteries. Do not
warm up the device or battery or use it near fire.
•Do not short-circuit the charging contacts with a metallic object, such as
a coin, a clip or a set of keys. This can cause accidental short-circuiting and
damage the device.
•Charge and recharge the battery only with the charger specified in the
Operating instructions/Quick Guide.
•Clean the device with a soft cloth, dampened slightly with mild soapy
water. Do not clean the device with harsh chemicals, solvents or other
corrosive substances.
•Only manufacturer is allowed to service the device.
SAFETY AND PRECAUTIONS
The user and person mounting the device is fully responsible for ensuring
that the TWIG Beacon Ex is used in explosive atmospheres in accordance
with the applicable regulations. The category of TWIG Beacon Ex is II 2 G
Ex ib IIC T4 Gb. TWIG Beacon Ex is an intrinsically safe, waterproof, dust-
and impact-resistant radio transceiver safety device phone for industrial
application in areas with an increased risk of explosion in accordance with
directive 1999/92/EC (ATEX 137). Only use approved accessories.
SAFETY INSTRUCTIONS
These safety instructions contain information and safety regulations
which are to be observed without fail for safe operation in the described
conditions. Nonobservance of this information and these instructions can
have serious consequences or it may violate regulations. Please read these
safety instructions carefully before starting to use the unit. In case of any
doubt (in the form of translation or printing errors) the English language
operating instructions shall apply.
FAULTS AND DAMAGES
If there is any reason to suspect that the safety of the unit has been impaired,
it must be withdrawn from use and removed immediately from the Ex-area.
Measures must be taken to prevent it from being restarted accidentally. The
safety of the device may be compromised, if, for example:
- there is visible damage to the housing.
- the unit has been subjected to excessive loads.
- the unit has been improperly stored.
- the unit has been damaged in transit.
- unit markings or inscriptions are illegible.
- malfunctions occur.
- permitted limit values have been exceeded.
SAFETY REGULATIONS
Use of the device TWIG Beacon Ex assumes that the operator complies
with conventional safety regulations and has read the certificate in order
to eliminate faulty operation of the unit. The following points are to be
observed:
- The battery of the device may not be changed inside the Ex-area.
- Only approved TWIG Beacon Ex accessories may be used.
- Connecting USB cable or any other connector is not allowed in Ex-area.
- Configuring the TWIG Beacon Ex is only allowed so that configuration
adapter is outside Ex-area.
- Opening and repair of the device is only permitted in the factory service
- User takes full responsibility on making sure that device may only be used
in areas which are in accordance to the Ex approval of the unit printed in the
type label of the unit.
- Scrubbing is prohibited while cleaning the device.
- The plastic enclosure shall be cleaned with damp or wet cloth only.
Recycle the batteries according to the country-specific regulations.