TWIG ARBOR MANHATTAN 03420, Инструкция по монтажу

Страница: 3 / 22

Thanking you for choosing to our product please read carefully the instructions in This manual installation instructions.
The product is manufacturing "Made in Italy", made of timber northern origin and is identified by a special label that specifies:
item code and its description, serial number, signature of quality control.
BEFORE ASSEMBLY
After unpacking, check that there are no damaged parts, missing or incorrect; in case occurs one of these cases, contact dealer.
If you are missing any components NOT assemble the structure partially, to prevent damage or that can create any dangerous
situations. Before assembly, check that the foundations are perfectly level to avoid problems of misalignment that affect the
stability of the structure and consequent difficulty opening / closing doors and windows; in this respect it should implement a plan
concrete of 15-20 cm thick.
DURING ASSEMBLY
Before you tighten the lag bolts is recommended pre-drill the piece to be fixed with a wood drill bit with a diameter less than the
diameter of the screw. Where in the assembly instructions is the image of the point you need to make a tapping hole of diameter
indicated in order not to damage the workpiece.
SAFETY
It is recommended to carry out the work always adopting the personal protective equipment such as gloves and goggles and
handle with care tools and power tools, as well as pay special attention in the use of the scale during the phases of assembly.
It is also recommended to keep children away from the installation area for the duration of the same.
MAINTENANCE
To prolong the life of wooden structures, it is necessary a correct and constant maintenance adapted especially to protect
by: weathering, UV, mold and mildew; To this purpose, it is advisable to impregnate the structure with impregnating waxed
external choosing the desired shade of the colors proposed. It is recommended to treat the elements of the structure on all
sides for complete protection and lasting and repeat the maintenance once a year or any time before the treatment previous've
lost shine and shades. Once installed in the structure, carry out checks on stability of the same. During the checks to verify the
tightness of the nuts and tighten them if necessary.
WARRANTY
As required by law, the warranty on manufacturing defects has a duration of 2 years from the date of purchase, it is
recommended Therefore, to keep the tax documents that certify the purchase. Warranty claims received after the expiry of the
itself, will NOT be accepted and in NO case Verrano reimbursed costs of labor, assembly and the like. NOT warranty defects
resulting from: foundations not flat, errors in the assembly of the structure, lack of adequate maintenance, use of fasteners
other than those supplied, natural disasters, violent weather, speed wind strength greater than or equal to 7 on the Beaufort scale.
TOLERANCE OF WOOD
Wood is a natural material and alive, so it is normal that each element is different, and therefore are allowed commonly accepted
the following irregularities: nodes having a maximum diameter of 5 cm, loose knots closable in phase mounting, cracks at the
ends of the boards that do not affect the width, not continuous cracks, cracks lower to 7 cm in length, deformations or bends
that do not affect the assembly. In case, falling of the nodes, obturate with wood putty; remove any resin pockets with normal
spatula.
COMPLAINTS
Any complaints should be reported to the store, making sure to communicate item code and tax documents related to the
purchased product.
LIABILITY '
Alce s.r.l. responsible for any use and / or incorrect installation or improper use of the materials sold. All verifications Static
and security must be controlled by a local technician as a function of: the place of installation; validity of the supports and the
corresponding fasteners; extent of any attics; use of coverage as a function of wind or snow load of installation areas.
EN
pag. 3