Operation manual VERA S15
11
Figure 2.3.4 - Connection diagram B15P
In operation mode 3 „PASSIVE 2“, the VERAS15
loudspeaker is operated with an M8
loudspe-
aker on the „high pass output“. The separation of the two loudspeakers is performed via the
internal passive crossover. The pin connection of the VERA S15
loudspeaker is switched to
pin
1+/-.
1. Connect the M8 loudspeaker to the high pass output! Never connect an amplifier to this
connector!
2. Switch the top switch to „ON“.
3. Switch the bottom switch to „PASSIVE mode“.
4. Connect the amplifier at the „Input“-pin.
WARNING
2.3.3 MODE 3 - PASSIVE 2 (M-SYS-TWO)
Never change the operation mode while the loudspeaker is in operation. This may damage the
connected loudspeakers.
NOTE
one amplifier channel is required
Pin 1+/- VERA S15+M8
Pin 2+/- free
OUTPUT to M8
INPUT
Содержание VERAS15
Страница 1: ...Operation manual VERAS15...