twaudio URA30i, Руководство по сборке

Страница: 6 / 14

Assembly Instructions URA30i
6
The payload of the
URA30i
universal rigging adaptor is designed of one T30i loudspeaker. Do
not exceed this payload.
WARNING
When moving (assembling, dismantling, maintaining) the
URA30i
universal rigging adaptor
with T30i loudspeaker, ensure sufficient space to prevent collisions with other objects.
WARNING
Do not squeeze or twist the electrical cables of the T30i loudspeaker during the installation of
the URA30i
universal rigging adaptor!
The respective national electrotechnical rules and regu-
lations are applicable.
CAUTION
Before mounting the
URA30i
universal rigging adaptor check that e.g. ceilings are capable to
carrying the payload of the components.
WARNING
WARNING
WARNING
Make sure that no water pipes, electrical lines or any other lines are behind the intended place
of mounting.
Only use wall plugs and screws which are suitable for the intended mounting and structural
fabric. All screws must be set and tightened properly. Ensure that the fixing holes have the
correct depth and diameter. Always use all fixing holes.
All screw connections should be checked when the
URA30i
universal rigging adaptor is
installed. If there are loose screws, tighten them. If this is no longer possible, the screws must
be replaced.
Whenever you make changes to the flown system, always use new cylinder screws (Item 1)
as delivered with the product. These items are available from TW AUDiO.
When working with heavy loads exceeding 20 kg (44 lbs.), use suitable aids (dollies, hoisting
slings, etc.). Multiple persons may be required depending on the situation.
NOTE
WARNING
WARNING