15
Using Your arc Slim Kit
Reminder: After priming a new
atomizer head and filling the tank,
it is recommended to wait 5-10
minutes before vaping to ensure the
atomizer head is fully saturated.
Atomizer Short Circuit Protection:
If an atomizer short circuit occurs,
the LED screen will flash up to 5
times and the arc Slim will refuse
to power or produce any vapour.
Replacing the atomizer head
should allow normal operation to
resume. Follow the steps outlined in
Replacing the Atomizer Head.
Atomizer Head Resistance:
If the fitted atomizer head resistance
is lower than 0.6ohm, the LED
screen will flash 5 times to indicate
the resistance is too low for the arc
Slim to power. If the atomizer head
resistance exceeds 3.0ohm, the LED
screen will flash slowly, indicating
the resistance is too high. Ensure
the fitted atomizer head resistance
is between 0.6ohm and 3.0ohm for
normal operation to resume.
