![TW Steel CEO Canteen Скачать руководство пользователя страница 5](http://html1.mh-extra.com/html/tw-steel/ceo-canteen/ceo-canteen_manual_1183759005.webp)
6
7
uSe Of The CrOWn
To adjust the time or set the date,
unscrew the crown cap by turning
it anti-clockwise. Once you have
unscrewed it, you will see the
(small) crown. Follow the instruc-
tions below to adjust the time and date. After adjusting them,
screw the crown cap back by turning it clockwise.
adjuSTing The Time
Pull out the crown to the 2nd position so
that the second hand stops at the (0)
position. Turn the crown to set the hour
and minute hands.
adjuSTing The daTe
Pull out the crown to the 1st position. Turn the
crown anti-clockwise to set the date. After the
date has been set, push the crown back to its
normal position.
uSing The ChrOnOgraph
The chronograph is able to measure and display the time ac-
curately to 1/20th of a second, up to a maximum of 59 minutes
and 59 seconds. The retrograde chronograph 1/20 second hand
keeps running continuously for 30 seconds after starting and then
stops at the (0) position. Press button B to change the watch to
the chronograph mode. The second hand stops at the (0) position
and changes to the chronograph 1/20 second hand.
The chronograph can be started and stopped at any time by
pressing button A.
Pressing button B resets the chronograph. All hands will then
return to their (0) position. The chronograph second hand can be
restarted by pressing button B once again.
If the chronograph second hand and the chronograph 1/20 se-
cond hand do not return to the (0) position after the chronograph
has been reset or after the battery has been replaced, you should
do the following. Pull out the crown to the 2nd position. Press but-
ton A to set the chronograph second hand to the (0) position.
Press button B to set the chronograph 1/20 second hand to the
(0) position. The chronograph second hands can be advanced
rapidly by continuously pressing button A or B. Once the hands
have returned to the (0) position, return the crown to its normal
position and screw the crown cap clockwise back to the case.
CAUTION: IF THE CROWN IS NOT PRESSED IN PROPERLY, THE WATCH IS NO
LONGER WATERPROOF AND THE MOVEMENT CAN BE SERIOUSLY DAMAGED!
Содержание CEO Canteen
Страница 1: ...SWISS made canteen tonneau GoLIatH tecH PILot...
Страница 2: ...CEO Canteen 5 CEO Tonneau 10 CEO Goliath 13 CEO Tech 15 CEO Pilot 16...
Страница 3: ......
Страница 17: ...w w w t w s t e e l c o m...