TW Audio VERA10, Руководство по монтажу

Страница: 12 / 14

3.2. Small frame – VERA SF10
VERA10 speaker elements are the only ones which may be set up on a VERA SF10.
Use is combination with VERA L24 or VERA S15 elements is not permitted.
Rigging mode
Suspending use of our speaker system is referred to as rigging mode. This involves
fastening the VERA SF10 small frame to load suspension equipment directly using a DHST
half coupler or an RSM12 eye bolt. 5 different attachment points (pick points) are provided
for this.
The VERA10 speakers are assembled on the adapter upside down when the VERA SF10 is
used in rigging mode. Observe that the angle selected applies on the link for the box itself.
When set up on a crossbeam using DHST, the system must under no circumstances
rotate out of its centre of gravity. The torsional forces could damage the crossbeam or
its suspension.
A maximum of four VERA10 elements may be suspended on the assembly adapter.
Ground stack mode
Placing a standing speaker system on the small frame is referred to as using the
VERA SF10 in ground stack mode. The HSF speaker stand flange will be required for
assembly in all cases. This is bolted to the small frame using the correspondingly labelled
holes, and then inserted onto a standard speaker tripod.
A maximum of four VERA10 elements may be stacked on the small frame.
There are only a few speaker tripods which may hold more than three VERA10
elements. Please observe the required system size when using tripods.