TW Audio VERA S18, Руководство по эксплуатации

Страница: 9 / 18

Operation manual VERA S18
9
4.1 Setup
The VERA S18 loudspeaker is designed for hanging and standing operation.
TW AUDiO recommends using only the accessories specified by TW AUDiO for securing and
mounting loudspeakers.
NOTE
Make sure the speakers are securely fastened to prevent personal injury and property damage.
WARNING
4. Commissioning
4.2 M20 pole mount flange
Make sure that all system structures are located on a firm, level surface and that the surface
can bear the total weight!
WARNING
For all system components mounted on top of the M20 pole mount flange, observe the res-
pective operating instructions!
Also be sure to observe all of the following warnings:
Make sure that the maximum load of 50 kg / 110 lbs for the M20 pole mount flange is not
exceeded! Figure
2.1 – Item 2.
WARNING
Make sure that no unauthorized persons can access the system structures!
Cordon off the area professionally!
WARNING
The M20 pole mount flange (figure 2.1- item 2) is not designed for side forces once mounted
– do not apply any pressure from the sides.
Make sure that no external forces are applied to the system structures. No objects or persons
should lean against the structures, no objects should be thrown against them. If pressure is
applied on the flange the loudspeaker may be damaged or falling over.
WARNING