TVU MLink Set-up and Operating Guide
TVU MLink
Page 29 of 75
Label
TVU Transmitter Live Status Screen Description
E
System Status Monitor:
Displays the current system status for TVU MLink including
the Bit Rate (B/R), the current Latency transmission setting, the TVU Receiver the Pack
is currently transmitting to, the current type of pre-set transmission Setting, the Video
Input source, the Video Format.
Note:
System Status values will only appear when the Transmission is Live.
F
Data Card Status Monitor:
Shows the current number and status of all data cards
connected to the TVU MLink. The status of data cards connected to the Pack will
appear as green, red or black. Green status indicates that the data card is connected.
Red status indicates that the data card is attempting to dial. Black status indicates
there is no card.
G
TVU MLink PID and Firmware Version Information:
Indicates the unit’s identifying
PID and version number and used when contacting TVU customer support.
H
Battery Status:
Indicates the status of battery levels for installed batteries.
I
Audio Input Level Monitor:
Dynamically displays the audio input level (DBFS) for TVU
MLink with graphical colors.
Table 16
Standby Video Input Status via Display Port or HDMI Port
When no camera is connected to the TVU MLink unit, the following is displayed on a
monitor when connected to the TVU MLink unit via the display port or HDMI port:
Label
TVU Transmitter Standby Video Input Status Screen Description
A
Connection Status:
Shows the status and IP of each network connection. The status
of data cards connected to the Pack will appear as green, red or black. Green status
Figure 26
Содержание MLink TE4100
Страница 2: ......
