Network Connection
5
MENU
IPC
Network Cable
Network Cable
Switch
Router
Computer
●
Access Through IP
-
Tool
In
LAN, there are two ways to access the camera. 1. Access Through
IP
-
Tool; 2. Direct Access Through WEB Browser
①
Make sure that the camera and the PC are connected to the local
network.
②
Install the IP-Tool from the CD and run it after installation.
Device
Network
Search
Immediate
Refresh
name
name
name
IPC
IPC
IPC
unknown
unknown
unknown
192.168.226.201
192.168.1.2
192.168.1.3
80
80
80
9008
9008
9008
255.255.
255.255.
255.255.
Modify Network Parameter
Mac Address
IP Address
Modify
CE :98 :23 :75 :35 :22
192
.
168
.
226
. 201
255
.
255
.
255
. 0
192
.
168
.
226
. 1
i
Tip: Enter the administrator password, and
then modify the network parameters.
Total Device: 3
Local IP Address:192
.
168
.
1
.
4
Subnet Mask:255
.
255
.
255
.
0 Gateway: 192
.
168
.
1
.
1
DNS
：
210
.
21
.
196
.
6
Device Name Device Type
IP Address
Http Port
Data Port
Subnet
Product Model
About
Subnet Mask
Gateway
Restore IPC Default Configuration
③
Modify the IP address. The default IP address of this camera is
192.168.226.201. Click the information of the camera listed in the
above table to show the network information on the right hand.
Modify the IP address and gateway of the camera and make sure
its network address is in the same local network segment as the
computer’s. Please modify the IP address of your device according
to the practical situation.
Mac Address
IP Address
Modify Network Parameter
Modify
CE :98 :23 :75 :35 :22
192
.
168
.
1
. 201
255
.
255
.
255
. 0
192
.
168
.
1
. 1
Subnet Mask
Gateway
modification, please enter the password of the administrator and click
“Modify” button to modify the settings.
The default password of the administrator is “
123456
”.
④
Double-click the IP address and then the system will pop up the
web browser to connect IP-CAM. Follow directions to download
and install the plugin in the computer. Then enter the user name and
password in the login interface.
●
Direct Access Through WEB Browser
450043001271 A0
The default username is
admin
; the default password is
123456
.
③
④
Route and connect the cables.
⑤
Secure the camera to the wall with screws provided as shown
below.
Loosen the screws to open the lower dome.
Rotation 0°~355°
Pan 0°~355°
Rubber
P
lug
Lower dome
Tilt 0°~67°
⑥
the camera on a monitor and then adjust the camera according to
the figure below to get an optimum angle.
Three-axis adjustment. Before adjustment, view the image of
⑦
screws. Then put the trim ring onto the lower dome and then rotate
it clockwise until it is locked.
Install the lower dome back to the camera and fix it with the
Transparent Dome Maintenance
Transparent dome is an optical element which is made of plastics. As dirt,
dust or fingerprints on the dome will reduce the clarity of the image, please
keep it clean in the course of installing or using but do not directly touch or
wipe it. If there is any dirt or dust, please follow these cleaning tips to clean
your dome camera.
*
If there is dust on the dome, please use a dry soft brush to gently brush it .
*
If there is water or grease on the dome, please gently wipe off the water or
grease with a soft cloth. Then use another clean cloth with a little neutral
detergent to wipe it several times until it is clean. Finally, dry it with a soft
cloth.
*
If there are fingerprints on the dome, please use a clean cotton cloth or lens
cleaning wipe with a little neutral detergent to wipe it several times and
then dry it with a soft cloth.
Tips
①
Make sure that the camera and the PC are connected via LAN.
②
Find the IP-Tool from the CD and then install it in the computer.
After that, run the IP-Tool.
③
Modify the IP address and make sure its network address is in the
same local network segment as the computer’s.
④
Open your web browser and enter the modified IP address in the
address bar to log in the web client. Follow directions to download
the plug-in in the computer. After that, enter the default user name
and password to log in.
Trim
ring
②
Rotate the trim ring anticlockwise to remove it from the camera.
For example, the IP address of your computer is 192.168.1.4. So
the
IP address of the camera shall be changed to 192.168.1.X. After
