Overview
Installation
Cable
Connection
1
2
3
Netw
ork
Cable
2
1
Quick
Start
Guide
HD PTZ
Camera
■
Please read this instruction carefully before using the product
and keep it for further reference.
■
All the examples and pictures used here are for reference only.
■
The contents of this manual are subject to change without
notice.
►
Connecting
Network
Cable
1 Ethernet
connector
2
3 Safety
wire
Power connector
1
2
3
DC12V
①
Loosen
the
nut
from
the
main
element.
②
Run
the
network
cable (without
RJ 45
connector) through the
both elements. Then
crimp
the
cable
with
RJ 45
connector
.
③
Connect
the
cable
to
the
hermetic
connector
.
Then
tighten
the
nut
and
the
main
cover
.
3
Micro
SD Card Installation
Please make sure the wall is strong enough to bear the dome
camera’s weigh and the camera is powered off during
installation.
This PTZ camera supports wall or ceiling mounting. Please select
a way to install as needed. The following instructions are for
reference only.
Insert
a
micro
SD
card
1
.
Loosen the four screws of
the cover and then remove
the cover.
2
.
Insert
a
micro SD
card as indicated
above and
then install
the cover
back
.
Wall Mounting
1. Pull the cables through the
bracket.
3. Drill the screw holes on the wall
according to the drill template. Then
insert the plastic plugs into the holes.
4. Fix two screws to the holes as
indicated by the arrows (left)
and leave 12mm clearance.
5. Connect the cables and then
hang the bracket on the wall.
6. Fix the bracket to the wall
with four screws.
2. Secure the PTZ camera to the
bracket with screws.
12
