Thank you for purchasing this panoramic camera!
Please read this manual carefully before operating the unit and retain it for future reference.
All examples and pictures used in the guide are for reference only.
The contents of this manual are subject to change without notice.
1. Electrical safety
All installation and operation here should conform to local electrical safety codes.
Do not use camera beyond specified voltage range.
Do not connect two power supplying sources to the device at the same time; it may
result in device damage! The product must be grounded to reduce the risk of
electric shock.
2. Environment
Heavy stress, violent vibration or exposure to water is not allowed during transportation,
storage and installation.
Do not install the product in extreme temperature conditions.
Do not expose the camera to electromagnetic radiation. Otherwise it may result in CMOS
sensor failure.
Do not allow water and liquid intrusion into the camera.
3. Operation and Daily Maintenance
Please shut down the device and then unplug the power cable before you begin any
maintenance work.
Do not touch the CMOS sensor optic component. You can use a blower to clean the dust on
the lens surface.
Always use the dry soft cloth to clean the device. If there is too much dust, use a cloth
dampened with a small quantity of neutral detergent. Finally use the dry cloth to clean
the device.
Please use a professional optical cleaning method to clean the enclosure. Improper
enclosure cleaning (such as using cloth) may result in poor IR functionality and/or IR
reflection.
4. Warning
This camera should be installed by qualified personnel only.
All the examination and repair work should be done by qualified personnel.
Any unauthorized changes or modifications could void the warranty.
Important Safeguards and Warning
.
