Network Connection
5
MENU
IPC
Network Cable
Network Cable
Switch
Router
Computer
●
Access Through IP
-
Tool
●
Camera Mounting with a Junction Box
Here we take accessing IP camera via LAN for example.
①
Make sure that the camera and the PC are well connected to the
LAN.
②
Find the IP-Tool from the CD and then install it in the computer.
After that, run the IP-Tool as shown below.
Device
Network
Search
Immediate
Refresh
name
name
name
IPC
IPC
IPC
unknown
unknown
unknown
192.168.226.201
192.168.1.2
192.168.1.3
80
80
80
9008
9008
9008
255.255.
255.255.
255.255.
Modify Network Parameter
Mac Address
IP Address
Modify
CE :98 :23 :75 :35 :22
192
.
168
.
226
. 201
255
.
255
.
255
. 0
192
.
168
.
226
. 1
i
Tip: Enter the administrator password, and
then modify the network parameters.
Total Device: 3
Local IP Address:192
.
168
.
1
.
4
Subnet Mask:255
.
255
.
255
.
0 Gateway: 192
.
168
.
1
.
1
DNS
：
210
.
21
.
196
.
6
Device Name Device Type
IP Address
Http Port
Data Port
Subnet
Product Model
About
Subnet Mask
Gateway
Restore IPC Default Configuration
③
Modify the IP address. The default IP address of this camera is
192.168.226.201. Click the information of the camera listed in the
above table to show the network information on the right hand.
Modify the IP address and gateway of the camera and make sure its
network address is in the same local network segment as that of the
computer. Please modify the IP address of your device according
to the practical situation.
Mac Address
IP Address
Modify Network Parameter
Modify
CE :98 :23 :75 :35 :22
192
.
168
.
1
. 201
255
.
255
.
255
. 0
192
.
168
.
1
. 1
Subnet Mask
Gateway
For example, the IP address of your computer is 192.168.1.4. So
the
IP address of the camera shall be changed to 192.168.1.X. After
modification, please enter the password of the administrator and click
“Modify” button to modify the setting.
The default password of the administrator is “
123456
”.
④
Double-click the IP address to open up the web browser or
manually enter the modified IP address in the address bar of your
browser. Then follow directions to download and install the plugin if
it is the first time for you to log in.
the user name and password in the login interface.
The default username is
admin
; the default password is
123456
.
⑤
Enter
450043001316 A0
②
Drill the screw holes and the cable hole (if you want to route
through the ceiling) on the wall or ceiling according to the drill
template.
Insert a micro
SD card
Mounting base
Rubber plug
Fixed screws
∅
4.50mm
90.23mm
90.22mm
③
the mounting base to the wall with the screws provided.
Route the cables and connect the relevant cables. Then fasten
④
Bracket adjustment. Before adjustment, preview the image of the
camera on a monitor and then loosen the fixed screws to adjust the
view angle of the camera. After that, tighten the fixed screws.
Rotate: 360
Pan: 360
Tilt: 90
°
°
°
①
Mount the junction box to the wall or ceiling with screws.
②
Route the cables and connect the relevant cables (Take cable
going through mounting surface for example).
③
Fix the camera onto the junction box with screws.
Cover
Daily Maintenance
Lens cover is an optical element. Please don’t touch or wipe the cover surface directly
during installation and use. Please follow these cleaning tips to clean it.
*
If there is dust on the lens cover, please use a dry soft brush to gently brush it .
*
If there is water or grease on the lens cover, please gently wipe off the water or grease
with a soft cloth. Then use oil-free cotton cloth with a little neutral detergent to wipe it
several times until it is clean. Finally, change the cloth to dry it .
*
If there are fingerprints on the lens cover, please use oil-free cotton cloth or paper
soaked with a little neutral detergent to wipe it several times and then dry it with a soft
cloth.
Tips
