10.
Manual Recording
8.
UPnP
9.
NAT
11.
Playback
Checkmark the device you want to add and then click “Add” button.The
NVR will automatically refresh the cameras and return to “Edit
Camera”
interface. “Online” status means connecting the device successfully and
you will see the live image. You may select the added device and click
button to modify channel, IP address, etc.
⑤
Version
Edit
Upgrade
Camera Name
Address
Model
Edit Camera
XXX
192 168 1 . 58
.
.
9008
admin
XXX
Port
Username
Protocol
Password
IP Camera 1
OK
Test
Cancel
No.
Camera Name
Address
Port
Protocol
Model
Preview
Status
Edit Camera
Edit Camera Group
IP Planning
Search Camera
1
2
3
192.168.1.20
192.168.1.38
192.168.1.45
IP Camera 1
IP Camera 2
IP Camera 3
XXX
XXX
XXX
4.1.0.0
4.1.0.0
4.1.0.0
Online
Offline
Online
XXX
XXX
XXX
80
80
80
►
WAN
Enable PPPoE and then enter the user name and password received from your
ISP.
②
Go to Start
→
Settings
→
Camera. Click “Add Camera” or behind the
column of the search camera and select “Manually Add” to add the IP cameras.
Enter IP address, server port, username and password of the IP camera. The IP
camera must be connected over WAN. And here the IP address of the IP camera
must be a WAN IP address.
①
Set the network of the NVR. Go to Start
→
Settings
→
Network
→
PPPoE.
►
NAT Settings
①
The NVR shall be powered on and connected to the network.
②
Go to Start
→
Settings
→
Network
→
TCP
/
IP. You can obtain the IP address,
subnet mask and gateway automatically. You can also manually enter them
according to the actual network situation. Please make sure the network segment
is the same as that of the network which is used.
③
Set
the
preferred
or
alternative
DNS
Server
.
Click “Apply”
to
save
the
parameters.
④
Go
to Start
→
Settings
→
Network
→
NAT tab. Enable NAT and select the
NAT Server Address (The default NAT Server Address is
nat.autonat.com
).
Click “Apply” to save the parameters.
nat.autonat.com
NAT Server Address
Enable
Visit Address www.autonat.com
Apply
►
After finishing the NAT settings, you can enter
www.autonat.com
in the
address bar of your browser and then press enter to go to the following
interface. If you are the first time to access the NAT, you shall download and
install the ActiveX according to the popup tips. After installing ActiveX
successfully, it will pop the login box.
NAT Access
Before recording, please install and format a HDD. In the live interface
you can see the menu toolbar. Click
button
to start
recording
.
Click
it
again
to
stop
recording
.
You
can
also click
to check the status of
the recording.
►
Click “Instant Playback” in the right-click menu of the camera’s preview
window to select or drag the playback progress bar to change the playback
time to play back the record.
Instant playback
Click
on the tool bar at the bottom of the live preview interface or click
Start
→
Playback to go to the playback interface as shown below. You can
also
add the playback cameras manually. Click
in the playback window to pop
up the “Add Camera” window. Check
the cameras in the window and then click
“Add” to add playback camera. The record files of the added playback camera
will be played in the playback interface.
►
General playback
You can use the UPnP function to enable the fast connection of the device to
WAN via a router without port mapping.
①
Go to Start
→
Settings
→
Network
→
UPnP,
and enable UPnP and then
click “Apply” button to save.
②
Enable the UPnP function in the router.
HTTP Port
HTTPS Port
Server Port
80
443
6036
80
443
183.17.254.19
183.17.254.19
Valid UPnP
Valid UPnP
Valid UPnP
Invalid UPnP
6036
183.17.254.19
Port Type
External Port
External Address
UPnP Status
Edit
Port
RTSP Port
554
554
Auto
Map Type
UPnP
NAT
Enable
Refresh
Apply
450041001
A0
222
Device Serial Number
interface to check the serial number or go to Start
Settings
Network
Network Status to check the serial number of the NVR).
Username
: The username of the NVR. The default username is admin.
Password
: The password of the NVR. The password is set by yourself when
you configure the wizard for the first time.
: Click on the menu bar at the bottom of the live
→
→
→
Enter Password
Enter Username
Enter device serial number
Login
Sync to IPC
Remain Bandwidth: 85/120Mb
③
Click “Refresh” button to refresh the UPnP status. If the UPnP status were
still “Invalid UPnP” after refreshing it for several times, the port would be wrong.
Please change the mapping type to “Manual” and then click to modify the
port until the UPnP status turns to “valid UPnP”.
Mac Address
Address
Sync to IPC
Edit IP
192 168 1 . 45
.
.
255 255 255 . 0
.
.
admin
192 168 1 . 1
.
.
Subnet Mask
Username
Gateway
Password
OK
Cancel
CE :98 :23 :75 :35 :22
