TVS Stryker 3V 2021, Руководство пользователя

Страница: 59 / 67

MAINTENANCE
REAR WHEEL REMOVAL AND REASSEMBLY
1. Remove the rear brake adjuster nut (1) and
disconnect the brake rod from the rear brake
lever.
2. Remove the split pin (2) and the nut (3) from
torque link mounting with the brake panel and
disconnect the torque link.
3. Remove the axle nut (4) along with a washer.
4. Pull out the axle (5) along with a washer and take
out the spacer bush from the rear wheel
assembly.
5. Tilt the vehicle to the left and take out the wheel
along with the brake panel. Separate the brake
panel from the wheel.
6. For locating and reassembling the rear wheel
easily, engage the gear. This will arrest the free
movement of the drum sprocket.
7. Reverse the procedure for reassembly.
Always make sure that whenever the wheel is
removed, axle nut is properly re-tightened to the
specified torque.
Warning
5
4
1
3
2
Once the split pins are removed, replace them with
new ones.
Caution
54