Tvone CORIOview MWP Series, Быстрый старт

Страница: 4 / 24

2 tvONE
Quick start
This Quick Start Guide gives you an overview of the steps involved in
setting up your CORIOview™ hardware and CORIOgrapher™ software.
It's easy to get started with your CORIOview, but if you want more help with any
of these steps, or with using the features of CORIOgrapher, select in
CORIOgrapher and search, or ask a question. Or visit
help.tvone.com/products/mwp-series/corioview.
1. Install your hardware.
a. Connect your display or displays to your output module.
Connect a source to each port of your input modules. If you intend
to use classic mode, we recommend you label your cables 1 up to 8.
If you intend to use dynamic mode, we recommend you label your
cables A up to H, from left to right.
Connect the LAN port of the CPU module to your network.
Video tearing
Using a mixture of frame rates and/or resolutions can cause video
tearing. For best results, make sure your display and sources use the
same frame rate.
b. OPTIONAL: Connect a digital audio device to the S/PDIF audio
output.
c. Power on your CORIOview.
2. Check your display looks correct for each source.