QSG- C2-6104A-V1.00
5
Quick start
Set up and test your unit with factory default settings.
1.
Connect one or more DVI-D or analog sources to the input
ports.
You can connect analog sources with a VGA to DVI-A
adapter.
2.
Connect a display to the output port.
The default output resolution is 1280x720p @60 Hz. For best
results, make sure your display supports this.
3.
Power on your C2-6104A.
4.
Press the first preset button.
Your sources show on your display.
5.
If you have any problems, restore your unit to factory
settings and then try setting up again.
Press and hold ON STANDBY and SELECT until you hear a
beep.
For troubleshooting advice, see the user guide. There’s a link
on the back page of this quick start guide.
