Tvone C2-1000 Series, Руководство по эксплуатации

Страница: 44 / 104

C2-1000 S
ERIES
O
PERATION
M
ANUAL
38
8.7.3 CV & YC Source Menu Items
Of the above Source Menu items, the Autoset sense and Autoset status functions,
RGB type and Pixel phase are specific to RGB signals only. The rest of the Source
menu items function with RGB, CV or YC type signals. In addition, there are four
additional Menu items that are only used with CV or YC type signals and these are
explained below:
Adjust the Brightness and Contrast of the image to your requirement.
Saturation is the amount of color present in the image. Hue is the color “tint”
parameter and the adjustment range is +90 degrees through to -90 degrees with 0
being the default.
Within limits, you can enhance or soften the appearance of detail within an image.
The Sharpness values go both negative and positive, with 0 being the default. Note
that over-enhancing an image has the side effect of making it appear to be noisy and
under-enhancing an image gives the appearance of poor video quality.
On occasion, a video source will have the color portion of the signal offset from the
luminance portion. If you’ve ever seen a poor quality comic book that has the outline
of the cartoon character’s head in one place on the page but the flesh tones for the
head offset slightly, you are seeing the print equivalent of Luminance to
Chrominance Phase Delay.
Fortunately, your unit provides a way for you to make the two signals occur at the
same time on the selected image. The adjustment range provides both positive and
negative levels of delay with 0 being the default.
8.7.4 Testcard Source Menu Items
This item is only available for units supporting Testcards (TC) sources.
Source : TC1
Testcard [ 0]
Source: YC1
Luma delay
[ 0]
Source: YC1
Sharpness [0]
Source: YC1
Satur [100] Hue [0]
Source: YC1
Bright [100] Contrast [100]