manualshive.com logo in svg

TVLogic R-5T, Руководство по эксплуатации, Страница: 7 / 44

Поделиться
Скачать
TVLogic R-5T Скачать руководство пользователя страница 7

LCD R

ack M

oun

table M

onit

or  7

3. Controls & Functions

  FRONT

TALLY

POWER

MENU
UP
DOWN
ENTER

USB

• [TALLY]

- Tally lamp that can be toggled in green or red  

  using the REMOTE(RS-422) port or TVLogic’s  

  control program(Observer).

  

• [POWER]

- Used to turn the power on and off. 

• [MENU]

- Used to activate the OSD menu.

- When the OSD menu is activated, press the  

  MENU button to exit from the menu.

- Press the MENU button more than 2 seconds,  

  input select menu will activated.(SDI, HDMI)

• [UP]

- Used to move within the menu when the OSD  

  menu is activated and is also used to increase

  the value of selected feature.

• [DOWN]

- Used to move within the menu when the OSD  

  menu is activated and is also used to decrease  

  the value of selected feature.

• [ENTER]

- Used to select the feature of main menu and  

  the sub menus.

- When the OSD menu is deactivated, press   

  the ENTER button longer to activate the    

  menus in order of : [VOLUME]-[BRIGHTNESS]- 

  [CONTRAST]-[CHROMA]-[SHAPNESS] -

  [PEAKING BOOST] After the function is  

 

  activated, press the [DOWN]/[UP] button to  

  adjust the values.

• [USB]  

- Use the Micro B Type USB. The OTG gender 

  is required when using a USB Memory  

 

  Stick.  

- Used to upgrade the firmware using a USB   

  Memory Stick or calibrate the monitor’s    

  color temperature using the TVLogic’s color  

  calibration tool. 

Содержание R-5T













































Отзывы:

Нет отзывов